Anchors for a Type 2 DOT Turbidity Curtain

Anchoring Options for the Type 2 Turbidity Curtain

Triton DOT turbidity curtain with anchoringQ
: I have a type 2 DOT turbidity curtain. Would I need anchors to secure this in place? What type of anchor would I use?

A: Yes, we do recommend using Marine Anchors, especially for Type 2 and the Type 3 turbidity curtains. Due torr the moving water conditions where these curtains are typically used, barriers may be prone to movement and instability. The use of an anchor can help keep the curtain in place, and allows it to operate at high levels throughout its use.

Questions about marine anchors? We can help. Call GEI Works at 1-772-646-0597 or contact us to discuss your project.

Marine Anchoring System Options for Turbidity Curtain

The type of marine anchor you would need to use depends entirely on your project and the water conditions you have. We offer several different types of systems allowing you to choose the one that best fits your site requirements.

Some of our options include a twenty-four (24) pound Danforth galvanized steel system and sixty (60) foot polypropylene rope with thimbles.

Some available marine anchoring system options will include the following:

Anchors for Type 2 DOT Turbidity Curtain
  • 24 lb/11 kg Danforth
  • 40 lb/18 kg Danforth
  • Galvanized Steel Chain
  • Poly Rope
  • Poly Hard Shell Buoy

If you have any additional questions regarding a marine anchoring system, including anchor spacing and requirements in your location, please don't hesitate to give us a call to discuss your project.

Need help with anchoring type 2 turbidity curtain? Call GEI Works at 1-772-646-0597or contact us to discuss your project.